How To Clean Pool Tile With Pressure Washer

Pools can be messy when you do not use them for a long time, even if they are covered. If you are having a pool party or want to enjoy a peaceful evening by swimming, you need a clean pool with clean water. 

Big pools are cool, but cleaning them is frustrating because it can take a long time. If you are cleaning your pool with a broomstick or mop, it will take hours, but with the help of a pressure washer, you can clean them perfectly within a few minutes, and then they will be ready to use. 

In this article, we will discuss how to clean the pool tile with a pressure washer so that you can clean them easily and efficiently without damaging them. So let’s get started.

Steps To Clean Pool Tile With Pressure Washer

Cleaning pool tiles is not too hard because they have fewer chances of damage, and they are much easier to clean than concrete or regular floors, but you should not be careful in cleaning them. These steps will properly guide you about the process of cleaning pool tiles:

Gather Your Equipment

The first thing that you will need to clean pool tile with a pressure washer is the pressure washer. There are different pressure washers, but you can use an electric pressure washer with a pressure range of 2000 to 2500 psi for the best results. Also, make sure that you have the proper attachments that you need. You should have proper nozzles and detergent if you need them. Also, it would help if you had proper safety measures and should have Personal Protective equipment to make yourself safe. 

Assemble The Equipment

After you have gathered everything, you should assemble it by following the standard process from the manufacturer. While you are assembling your equipment, make sure that you are also checking them. 2000 psi is not something that you can use with damaged equipment. You should check the valves and pipes for any signs of cracks. Also, ensure that the electric cord is perfect without turning the power on. Safety is the priority, and you should have no compromise on that. Also, ensure that you use a suitable nozzle and other attachments with the pressure washer. 


Test Your Pressure Washer On An Small Area

After you have assembled your pressure washer, it is time to test it. Use the pressure washer on a small one in the lower portion of the pool so that it is not easily visible if things do not go according to plan. Apply the widest nozzle and start spraying the water at a distance. Gradually decrease the distance between the surface and nozzle till you have the right cleaning effects. Ensure your nozzle does not go closer than 6 inches to the surface. If you do not have the desired cleaning effect, switch the nozzle to a more powerful one and repeat the step.

Its Cleaning Time

When you have selected the right nozzle and know the appropriate distance, it is time to pressure wash your tiles with it. The best practice is to pressure wash the pool floor first and then move on to the wall. Make sure you have a stable standing position because the pressure washer has recoil. Make sure that you follow these instructions:

  • First, wash the floor, then the lower walls, and then wash the upper part of the wall from outside the pool. 
  • Try to keep a constant distance of the spray wand from the surface.
  • Use the pressure washer in a zig pattern to avoid streaking.
  • Make sure to spend constant time and not overwash or under wash a specific area.
  • If you counter any tough stain, use the detergent or brush, and do not clean them with overpressure.

Apply The Detergent

Now that you have cleaned your pressure washer, if you need a final touch, you can use detergent. Detergents can provide shiny and attractive looks to the pool tile, and they will look like new. Please select a suitable detergent that is rated to clean the pool tiles and fill it in the detergent tank. Now apply the detergent to a small area and check the results. If you find the detergent effective, it is time to clean the whole pool. Make sure to follow the same order of the pool floor and lower and upper walls. After applying the detergent, leave it for some time for reaction, then wash it with fresh water.

Things That Are Important To Know

When cleaning the pool tiles of a pressure washer, ensure there is no furniture in close vicinity. Also, make sure that you remove all the visible debris and trash, such as leaves, from the pool before you start cleaning it. Check the pool thoroughly after cleaning it, and if you find any debris or dirt left, you can remove it using the brush. Be extra careful on the pool surface because it can be very slippery when wet. When cleaning with a pressure washer, it is necessary to have long boots and pants with safety goggles and gloves. 

Wrap Up

Pressure washers are the easiest way to clean pool tiles, and a medium range 2000 to 2500 psi electric pressure washer can do the job pretty well. It is recommended to clean the pool tiles at least twice a year, and the best time is to clean them before the summer starts. It is an easy job, but you should not forget the safety guidelines for using the pressure washer. Removing any visible debris or trash that you can take out is very important because they can go into pipelines and choke them. Please do not use the ladder in the swimming pool when cleaning it with the pressure washer because the surface can be very slippery when wet. 

At last, when you apply the detergent, ensure that you have installed the soap nozzle and leave it for some time. Happy cleaning!

Jose Kelly